AAU Student Projects is unavailable between June 15th 1.30pm and 17th 1.30pm due to planned system maintenance. The projects cannot be downloaded during this period.
AAU Student Projects - visit Aalborg University's student projects portal
An executive master's programme thesis from Aalborg University
Book cover


Experimental Testing of PEM Electrolyzer Degradation

Author

Term

4. term

Publication year

2026

Submitted on

Abstract

This thesis investigates degradation in a single-cell PEM water electrolyzer (2.89 cm2, Nafion 117, IrO2 anode, Pt/C cathode) through controlled long-term experiments and detailed electrochemical analysis. The central research question is to what extent the observed voltage increase during steady-state and load-cycling operation is driven by the instantaneous operating load versus the cumulative operating history, and whether the change is mainly ohmic (membrane and contact resistance) or non-ohmic (catalytic and mass transport losses). The same cell was subjected sequentially to a break-in procedure, a 64.2 h steady-state test at 0.5 A/cm2 and 60 °C, 386 load cycles including open-circuit steps, and a temperature sweep at 60, 70 and 80 °C. Voltage changes were analyzed using iR-free voltage, high-frequency resistance (HFR), equivalent-circuit fitting of impedance spectra, and a semi-empirical polarization model. The results indicate that the voltage evolution is more strongly linked to stops and restarts than to the detailed load profile. The largest permanent voltage rise (+159 mV at 1.0 A/cm2) occurred during the steady-state test, whereas cycling blocks produced no clear net increase, and a substantial part of the rise was reversible after a pause of about 4 hours. The net change at 1.0 A/cm2 was 71 mV, with roughly 23% attributed to ohmic losses, implying that degradation is predominantly non-ohmic. HFR increased by about 19% over the entire test, mainly during early cycling and across the steady-state period, but accounted for only around one fifth of the total voltage rise. In the temperature sweep, HFR decreased by 17%, confirming that the method is sensitive to ohmic changes. Overall, the project provides a structured experimental and analytical framework for distinguishing different degradation contributions in PEM electrolyzers and highlights the role of operating strategies, pauses, and temperature in determining lifetime and efficiency.

Denne afhandling undersøger nedbrydning i en enkeltcelle PEM-vand-elektrolyse (2,89 cm2, Nafion 117, IrO2-anode, Pt/C-katode) ved hjælp af kontrollerede langtidsforsøg og detaljeret elektrokemisk analyse. Det centrale forskningsspørgsmål er, i hvor høj grad den observerede spændingsstigning under både stationær drift og belastningscykling skyldes den aktuelle driftsbelastning eller den kumulative drifts­historik, og om ændringen primært kan tilskrives ohmiske tab (modstand i membran og kontakter) eller ikke-ohmiske tab (katalyse og masseoverførsel). Den samme celle blev sekventielt udsat for et indkøringsforløb, en 64,2 timers stationær test ved 0,5 A/cm2 og 60 °C, 386 belastningscykler med perioder ved åben kreds, samt en temperatursweep ved 60, 70 og 80 °C. Spændingsændringerne blev analyseret ved hjælp af iR-fri spænding, højfrekvent modstand (HFR), ækvivalentkredsløbsfit af impedansspektre samt en semi-empirisk polarisationsmodel. Resultaterne viser, at spændingsudviklingen i høj grad følger stop og genstarter snarere end den konkrete belastningsprofil. Den største permanente spændingsstigning (+159 mV ved 1,0 A/cm2) opstod under den stationære test, mens cyklingsblokke ikke gav en tydelig nettoforværring, og en betydelig del af stigningen var reversibel efter en pause på cirka 4 timer. Den samlede nettoændring ved 1,0 A/cm2 var 71 mV, hvoraf omkring 23 % kunne tilskrives ohmiske tab, hvilket indikerer, at nedbrydningen hovedsageligt er ikke-ohmisk. HFR steg omkring 19 % over hele testforløbet, især i den tidlige cykling og under den stationære test, men forklarede kun cirka en femtedel af den totale spændingsstigning. I temperatursweepet faldt HFR med 17 %, hvilket bekræfter, at metoden er følsom over for ohmiske ændringer. Samlet giver projektet et struktureret eksperimentelt og analytisk rammeværk til at skelne mellem forskellige nedbrydningsbidrag i PEM-elektrolysatorer og understreger betydningen af driftsstrategier, pauser og temperatur for levetid og effektivitet.

[This abstract has been generated with the help of AI directly from the project full text]

Keywords