4. term

Chemical Engineering, Master

1 - 35 out of 35Page size: 100
RSS feed of this list
  1. 2023

  2. Optimization of natural gas sweetening process by Alkano-amines and membrane permeation in Aspen Hysys.

    Muhammad Shoaib Arshad Khan

    Chemical Engineering, Master, (Master Programme) 4. term, 2023

    Student thesis: Master Thesis and HD Thesis

  3. Process simulation and techno-economic analysis of CESAR-1 solvent in post combustion carbon capture, and benchmarking with MEA solvent

    Yasemin Mertdag

    Chemical Engineering, Master, (Master Programme) 4. term, 2023

    Student thesis: Master Thesis and HD Thesis

  4. Process simulation, optimization and economic analysis of plastics pyrolysis using DWSIM

    Vedran Muhar

    Chemical Engineering, Master, (Master Programme) 4. term, 2023

    Student thesis: Master Thesis and HD Thesis

  5. Quantification of Concentrations in Complex Mixtures without Having a Corresponding Calibration Set

    Karolina Agata Szlek

    Chemical Engineering, Master, (Master Programme) 4. term, 2023

    Student thesis: Master Thesis and HD Thesis

  6. 2022

  7. Simulation Train Design and Optimization in Offshore Oil and Gas Production facilities: Simulation train design

    Suborna Rani Nath

    Chemical Engineering, Master, (Master Programme) 4. term, 2022

    Student thesis: Master Thesis and HD Thesis

  8. 2020

  9. In-situ Electrochemical Regeneration of Granular Activated Carbon - Experimental and Theoretical Study Regarding the Treatment Performance of Dye and Pesticides

    Harold Ifedayo Oyovwevotu

    Chemical Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  10. Investigation and Optimisation of Fusarubins Production in Fusarium solani via Targeted Deletion

    Samba Eveline Kabemba Kaniki

    Chemical Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  11. Kinetic modeling and rate constant determination of Vacuum-UV oxidation of BAM in Danish groundwater

    Lars Breinholt

    Chemical Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  12. Process design and simulation of gasification and Fischer-Tropsch process for biofuels production from lignocellulosic biomass

    Matevz Mencigar

    Chemical Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  13. Study of the reduction of fluoride content in Ghana's groundwater

    SARA NORIEGA OREIRO

    Chemical Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  14. 2019

  15. Catalyzed Calcium Peroxide as Treatment Technology for Organic Compound Contaminated Soil and Groundwater

    Barend de Jong

    Chemical Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  16. Influence of cell design and hydrodynamics on performance of redox flow batteries

    Talitha Giaquinto

    Chemical Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  17. Raman Spectroscopy for Monitoring Aqueous Phase Hydrogen Sul-phide Scavenging Reactions with 1,3,5-tri-(2-hydroxyethyl)-hexahydro-s-triazine

    Leah Nygaard Johansen, Lykke Kloster

    Chemical Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  18. Using Hyperspectral imaging for characterisation of wheat kernels.

    Frank Manfred Hansper

    Chemical Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  19. 2017

  20. Estimation of long-term resistance changes in a submerged MBR system using theoretical and empirical methods

    Mátyás Tóth

    Chemical Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  21. Investigation of the Photocatalytic and Hydrophilic properties of the thermally reduced Graphene Oxide/TiO2 Membranes

    Birgit Wright

    Chemical Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  22. Molecular Imprinted Particles - Three different methodologies for the specific recognition of saccharides in aqueous solutions

    Rasmus Frandsen

    Chemical Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  23. Optimization of Offshore Oil&Gas Separation Train

    Pasquale Antonino Petrarulo

    Chemical Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  24. Synthesis of Polylactic Acid

    Pranas Vitkevicius

    Chemical Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  25. 2016

  26. Geopolymer synthesis and characterization using Raman spectroscopy, FT-IR, DSC, XRD and compressive strength test

    Guillermo John Chaquinga Navarro, Kristof Gazda

    Chemical Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  27. Graphene Oxide/Titanium Dioxide Membranes

    Thomas Reinhald Jensen, Morten Lykke Krogh Pedersen

    Chemical Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  28. Power generation from sub-boiling geothermal wells using supercritical CO2

    Filip Vorobjov

    Chemical Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  29. 2015

  30. The Environmental Impact due to the Use of Cu and Zn in the Pig Industry.

    Annette Jensen

    Chemical Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  31. 2012

  32. Chalk production at Tyra Field, In the colloidal perspective

    Henrik Jepsen

    Chemical Engineering, Master, (Master Programme) 4. term, 2012

    Student thesis: Master Thesis and HD Thesis

  33. 2011

  34. Facies and Petrophysical Analysis and Modelling of Sandstone Layers: An Evaluation of the Komso Field

    Stephanie Otema Adu

    Chemical Engineering, Master, (Master Programme) 4. term, 2011

    Student thesis: Master Thesis and HD Thesis

  35. Investigation of Fouling Formation during H2S Scavenging with 1,3,5-tri-(2-hydroxyethyl)-hexahydro-s-triazine

    Henrik Madsen

    Chemical Engineering, Master, (Master Programme) 4. term, 2011

    Student thesis: Master Thesis and HD Thesis

  36. 2010

  37. Computational Fluid Dynamic Predictions of Mixing in a Double-Rushton Stirred Tank

    Pascal Locht

    Chemical Engineering, Master, (Master Programme) 4. term, 2010

    Student thesis: Master Thesis and HD Thesis

  38. Forays in Process Analytical Technologies and Theory of Sampling: 1. Feasibility of handheld NIR characterization in small-scale berry wineries (PAT) 2. Variographic analysis of standard procedures for industrial waste water characterization (TOS)

    Dorthe Kristensen

    Chemical Engineering, Master, (Master Programme) 4. term, 2010

    Student thesis: Master Thesis and HD Thesis

  39. 2009

  40. Gastørring: Termodynamisk simulering af en vand/glykol blanding

    Dan Christensen

    Chemical Engineering, Master, (Master Programme) 4. term, 2009

    Student thesis: Master Thesis and HD Thesis

  41. 2008

  42. CFD Simulation of a Fin-and-Tube Heat Exchanger: Heat transfer, fluid flow, and turbulence model analysis using 3D open source CFD code

    Anna Margrete Hansen

    Chemical Engineering, Master, (Master Programme) 4. term, 2008

    Student thesis: Master Thesis and HD Thesis

  43. MarvinLogoHappy.png

    Evaluation of Sampling Facilities and Process Analytical Technologies in Applied Biotechnology: Process Sampling, Representativeness, and Acoustic Chemometrics

    Ludovic Boland

    Chemical Engineering, Master, (Master Programme) 4. term, 2008

    Student thesis: Master Thesis and HD Thesis

  44. Limning af aluminium: hvorfor opstår der områder uden vedhæftning ved design af winglets,

    Allan Holm Nielsen

    Chemical Engineering, Master, (Master Programme) 4. term, 2008

    Student thesis: Master Thesis and HD Thesis

  45. Modelling and Analysis of the CO2 Post-Combustion Capture Process

    Serge Cheungoue

    Chemical Engineering, Master, (Master Programme) 4. term, 2008

    Student thesis: Master Thesis and HD Thesis

  46. Aanlytical tool For Rapid analysis of Edible oil

    Rizwana Shaik

    Chemical Engineering, Master, (Master Programme) 4. term, 2008

    Student thesis: Master Thesis and HD Thesis

  47. 2007

  48. Nye teknikker til rensning af vand i danske svømmebade med fokus på elektrokemisk oxidation og desinfektion

    Lars R. Bennedsen, Jens Muff

    Chemical Engineering, Master, (Master Programme) 4. term, 2007

    Student thesis: Master Thesis and HD Thesis