1. 2021
  2. CFD analysis of sand particles erosion in a pipe bend

    Taline Muniz Da Silveira Gomes

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2021

    Student thesis: Master thesis (including HD thesis)

  3. Optimal Design and Model Predictive Control of an Over Actuated UAV for Internal Wind Turbine Blade Inspection

    David Ársælsson, Daniel Revsbech Pedersen, Jesper Friis Ankersen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2021

    Student thesis: Master thesis (including HD thesis)

  4. Predicting Phosphorus Concentrations in WWTPs Using Data-Driven Methods

    Laura Debel Hansen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2021

    Student thesis: Master thesis (including HD thesis)

  5. 2020
  6. Characterisation of Salicornia dolichostachya biomass, sugar-to-lipid conversion using Hermetia illucens and biorefinery to sustainable jet fuel

    Malthe Fredsgaard, Laura Sini Sofia Hulkko

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2020

    Student thesis: Master thesis (including HD thesis)

  7. Design and Implementation of a Sliding Mode Control based Pitch Controller for a Variable Pitch Wind Turbine

    Van Roy Tran

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2020

    Student thesis: Master thesis (including HD thesis)

  8. Fault detection of a controlled rectifier using machine learning

    Mohamed Ameen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2020

    Student thesis: Master thesis (including HD thesis)

  9. Large Eddy Simulation On Vortex Shedding For A Helical-Twisted Cylinder Subjected To Crossflow

    Sergio Mohr Peraza

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2020

    Student thesis: Master thesis (including HD thesis)

  10. Thermo-economic Analysis of a Solar Pit Seasonal Thermal Energy Storage for Greenhouse Heating

    João Pedro Tarouca Fael

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2020

    Student thesis: Master thesis (including HD thesis)

  11. Transient analysis of circuit breakers in an offshore wind power system based on the Cassie-Mayr model

    Maria Alexandra Balslev Jørgensen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2020

    Student thesis: Master thesis (including HD thesis)

  12. 2019
  13. Active damping of grid-connected converters with LCL filter: Comparison of common methods and further development

    Mikkel Rindholt

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  14. Application Study for a Modern Circuit Breaker: Current Protection

    Waqas Aslam Cheema

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  15. CFD simulation of H2S Scavenger injection

    Emil Tornel Jørgensen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  16. CFD study of in-line zinc arc spray: Parametric study of spray pattern

    Hans Peter Bak

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  17. Design of a DC/DC Converter for Power Transmission to a ROTV

    Christian Lindquist

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  18. DETECTION OF HYDRAULIC CYLINDER LEAKAGE

    Dominik Marija Rebic

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  19. Student thesis: Master thesis (including HD thesis)

  20. Gas leakage detection in hydraulic accumulator - A neural network approach -

    Alessandro Racca

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  21. Modeling of Corrosion Rate Inside a Pressure Vessel

    Nikolaj Iversen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  22. Numerical optimisation of vortex generators in fin and tube heat exchangers

    Palle Lang Nielsen, Florian Marcus Fries

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  23. Predicting flammability limits for hydrocarbons gases and mixtures with nitrogen as inert gas

    Jonas Blom Ottosen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  24. Study of Pelleting Process Using Design Of Experiment And Numerical Optimization

    Per Mosegaard Jørgensen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2019

    Student thesis: Master thesis (including HD thesis)

  25. 2018
  26. Aero-Hydro-Servo-Elastic Modelling and Control of a Scaled Floating Offshore Wind Turbine on a Tension Leg Platform Including Experimental Validation

    Jesper Kirkegaard Jensen, Kasper Laugesen, Kasper Jessen, Signe Møller Mortensen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2018

    Student thesis: Master thesis (including HD thesis)

  27. Student thesis: Master thesis (including HD thesis)

  28. 2017
  29. Experimental analysis of analytical wake models for wind turbines

    Luis Garcia Salgado

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2017

    Student thesis: Master thesis (including HD thesis)

  30. H-infinity robust controller for wind turbine power boosting

    Dorin Bordeasu, Ali Debes

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2017

    Student thesis: Master thesis (including HD thesis)

  31. Quantitative reliability modelling and functional safety calculations of Svend topside High Integrity Pressure Protection System

    Jacob Glæsner

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2017

    Student thesis: Master thesis (including HD thesis)

  32. 2016
  33. Detection of hydraulic cylinder leakage

    Dmitrij Lukjanec, Arne Vietor, Zoltan Balint

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2016

    Student thesis: Master thesis (including HD thesis)

  34. Dynamic Model of a Fixed Grate Combustion in Modelica

    Johannes Veje

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2016

    Student thesis: Master thesis (including HD thesis)

  35. Membrane Fouling Modeling and enhancement through gas injection

    Dario Spina

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2016

    Student thesis: Master thesis (including HD thesis)

  36. Model predictive control of wind turbines

    Vasilis Katsifas

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2016

    Student thesis: Master thesis (including HD thesis)

  37. Numerical Modeling of the Wood Pelleting Process

    Simon Klinge Nielsen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2016

    Student thesis: Master thesis (including HD thesis)

  38. Voltage Control of Hybrid Photovoltaic/ Battery Power System for Low Voltage DC Micro grid

    Dragos Ovidiu Olteanu

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2016

    Student thesis: Master thesis (including HD thesis)

  39. 2015
  40. Analysis of the application and sizing of pressure safety valves for fire protection on offshore oil and gas installations

    Jacob Gram Iskov Eriksen, Michael Skov Bjerre

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2015

    Student thesis: Master thesis (including HD thesis)

  41. CFD Flow Field Study of a Hydrocyclone Operating under Non-Optimal Conditions

    Frank Bjerre Sørensen

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2015

    Student thesis: Master thesis (including HD thesis)

  42. Modelling and Control of a Multi-Zone HVAC System for an Unmanned Transformer Platform

    Sandra Lindberg Pedersen, Ioannis Or Joanis Ntourai Or Duraj

    Sustainable Energy Engineering, Master, (Master Programme) 4. semester, 2015

    Student thesis: Master thesis (including HD thesis)