1. term

Department of Materials and Production › Study Board of Materials and Production › Electro-Mechanical System Design, Master

2. term

Department of Materials and Production › Study Board of Materials and Production › Electro-Mechanical System Design, Master

3. term

Department of Materials and Production › Study Board of Materials and Production › Electro-Mechanical System Design, Master

4. term

Department of Materials and Production › Study Board of Materials and Production › Electro-Mechanical System Design, Master

  1. 2020
  2. Analysis of Control Performance of a Reluctance Magnetic Lead Screw

    Eric Falcon

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2020

    Student thesis: Master thesis (including HD thesis)

  3. Development, validation and optimization of a speed steering system

    Kenia Labata Lezaun

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2020

    Student thesis: Master thesis (including HD thesis)

  4. 2019
  5. Design, Modeling and Control of an Under-actuated Gripper

    Peter Jacob Sørensen

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2019

    Student thesis: Master thesis (including HD thesis)

  6. 2017
  7. Design and implementation of ultrasound based lubrication film measurement in a fluid power motor

    Jens Rendbæk, Lasse Almind Jensen

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2017

    Student thesis: Master thesis (including HD thesis)

  8. Design of a Visual Servoing System for a SCARE type Robot to Perform a Placing Operation

    Thomas Pank Roulund

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2017

    Student thesis: Master thesis (including HD thesis)

  9. Topology Optimisation of Hydraulic Cylinder Direct Drive Targeting Energy Effciency and Control Performance

    Søren Valentin-Pedersen, Rasmus Aagaard Hertz, Peter Sloth-Odgaard

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2017

    Student thesis: Master thesis (including HD thesis)

  10. 2015
  11. Control of Power Factor Correcting Boost Converter Supplying an Inverter for an Asynchronus Motor

    Lasse Ravnborg Jørgensen, René Forsberg Damgaard

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2015

    Student thesis: Master thesis (including HD thesis)

  12. Development of an Automatic Parameter Identification Method for PMSM Drives with an LC-Filter

    Magnus Lønstrup Weber, Jeppe Haals Christensen, Nikolai Hedegaard Kristensen

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2015

    Student thesis: Master thesis (including HD thesis)

  13. Enhanced Core Cooling for a Transformer

    Rolf Nyborg Broge

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2015

    Student thesis: Master thesis (including HD thesis)

  14. 2014
  15. Analysis and Control of a Magnetic Lead Screw for Servo Application

    Simon Christensen, Søren Elton Mark

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2014

    Student thesis: Master thesis (including HD thesis)

  16. Manufacturing, Modelling and Control of a High Speed Permanent Magnet Synchronous Machine including a Thermal Analysis

    Dan Mølgaard Mathiasen, Nicolaj Thomas Olesen

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2014

    Student thesis: Master thesis (including HD thesis)

  17. 2013
  18. Analysis of Active Electromagnetic Bearing for Darrious Type Wind Turbines

    Henning Bjerregaard, Rune Ryberg Thygesen, Kristian Sloth

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2013

    Student thesis: Master thesis (including HD thesis)

  19. Design and Control of Log Rolling Robots - Using Model Predictive Control for Decision Making

    Kevin Strandby Rice

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2013

    Student thesis: Master thesis (including HD thesis)

  20. 2012
  21. Design of Stewart Platform for Wave Compensation

    Anders Lolk Lohmann Madsen, Søren Giessing Kristensen

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2012

    Student thesis: Master thesis (including HD thesis)

  22. Energy Efficient Control of an Induction Machine for an Electric Vehicle

    Niels Balzer Sørensen, Bjørn Bøge, Thomas Christensen

    Electro-Mechanical System Design, Master, (Master Programme) 4. term, 2012

    Student thesis: Master thesis (including HD thesis)

  23. 2011
  24. Efficiency Analysis of a Radial Piston Pump Applied in a 5MW Wind Turbine with Hydraulic Transmission

    Kasper Aastrup Mortensen, Klaus Høj Henriksen

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2011

    Student thesis: Master thesis (including HD thesis)

  25. Friction Modelling and Parameter Estimation for Hydraulic Asymmetrical Cylinders

    Casper Olesen, Mads Hvoldal

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2011

    Student thesis: Master thesis (including HD thesis)

  26. 2010
  27. Design and Construction of a Facility for Testing Friction in Hydraulic Cylinders

    Daniel Henriksen

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2010

    Student thesis: Master thesis (including HD thesis)

  28. Validation study of real gas models: Applied on a wide range of temperatures and pressures

    Jeppe Mulvad Larsen

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2010

    Student thesis: Master thesis (including HD thesis)

  29. 2009
  30. Adaptiv regulering af web winder

    Alexander H. Andersen, Thor L. Lemminger, Mads P. Z. L. Andersen

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2009

    Student thesis: Master thesis (including HD thesis)

  31. Control of methanol fuelled HTPEM fuel cell system

    Simon Lennart Sahlin, Jesper Kjær Sørensen

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2009

    Student thesis: Master thesis (including HD thesis)

  32. Control of methanol fuelled HTPEM fuel cell system

    Simon Lennart Sahlin, Jesper Kjær Sørensen

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2009

    Student thesis: Master thesis (including HD thesis)

  33. 2008
  34. Comparison of Advanced Control Schemes Implemented on Hydraulic Actuated Robot Manipulator

    kristian Holm Nielsen, Lasse Schmidt

    Electro-Mechanical System Design, Master, (Master Programme) 2. term, 2008

    Student thesis: Master thesis (including HD thesis)