Structural and Civil Engineering, Master

Master Programme

Education structure: Education

1. term

Department of Built Environment › Study Board of Civil Engineering › Structural and Civil Engineering, Master

2. term

Department of Built Environment › Study Board of Civil Engineering › Structural and Civil Engineering, Master

3. term

Department of Built Environment › Study Board of Civil Engineering › Structural and Civil Engineering, Master

4. term

Department of Built Environment › Study Board of Civil Engineering › Structural and Civil Engineering, Master

1 - 100 out of 166Page size: 100
RSS feed of this list
  1. 2022

  2. Directional Analysis of Nonlinear Waves: Nonlinear Effects in Relation to Estimation of Directional Parameters

    Louise Vixø, Sarah Krogh Iversen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2022

    Student thesis: Master Thesis and HD Thesis

  3. Effect of Vertical Cyclic Load Characteristics on the Response of Suction Bucket Foundations

    Kristian Gordon Clausen, Nhivejen Thangaratnam, Redas Pilsudskis

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2022

    Student thesis: Master Thesis and HD Thesis

  4. Estimation of actuator parameters for a Reaction Wall through Pushover Analysis

    Boris Borisov Minkov

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2022

    Student thesis: Master Thesis and HD Thesis

  5. Numerical Seismic Response Analysis of an Offshore Wind Turbine Foundation

    Rasmus Emil Vestergaard Sørensen, Casper Schrøder Jensen, Emilie Kongstad Sørensen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2022

    Student thesis: Master Thesis and HD Thesis

  6. 2021

  7. Analysis of suction installation of monobucket in cohesionless soil.

    Eric Geraldo De-Lima

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  8. Applicability of Smoothed Particle Hydrodynamics to determine forces on offshore structures

    Jonas Birkbak Højen, Jonathan Büttner, René Skak Hansen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  9. Hydrodynamic Effects of Heave plates

    Hans Lindenchrone Dueholm, Lars Kristensen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  10. Monotonic Tensile Loading of Suction Bucket FoundationModel in a Pressure Tank

    Elena-Ioana Moldovan, Carolina Andrea Vial Tardio

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  11. Numerical Analyses of Dip-Slip Fault Rupture-Suction Bucket Interaction

    Vasileios Papavasileiou

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  12. Numerical predictions for centrifuge model tests of suction bucket foundation on liquefiable seabed

    Alfonso Estepa Palacios, Duy Manh Nguyen, Vladimir Markovic

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  13. Real-Time Implementation of Bowed Instruments Using Static And Dynamic Friction Models: Friction Drum and Amoeba Violin

    Marius George Onofrei

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  14. Reliability updating of existing bridges based on proof loading

    Jelena Perisa

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2021

    Student thesis: Master Thesis and HD Thesis

  15. 2020

  16. CFD analysis of wave-chamber interaction on the Floating Power Plant hybrid wind-wave platform

    Miguel Anton Aguilar

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  17. Earthquake Design - Response assessment of steel structures under earthquake effect

    Theodoros Kazakopoulos, Filippos Fillippou

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  18. Evaluation of Design Practices in Geotechnical Engineering

    Tommy Bank, Laura Nim Pedersen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  19. Investigation of impact loads caused by the dynamic effect of falling debris initiating from a design failure scenario in an RC structure

    Michael Winther Pedersen, Kasper Steinbjørn Dyhr

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  20. Investigation of the Effect of Load Duration on Swelling Pressure and Preconsolidation Stress in Oedometer Testing on Søvind Marl

    Ma Dimphna Sumaoy

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  21. Reliability-based classification of existing bridges through upper bound plasticity theorem

    Kenneth Dahl Schiøttz Damsgaard

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  22. Reliability of Fibre-Reinforced Polymer Structures

    Casper Sort Nielsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  23. Safety in nonlinear reinforced concrete design

    Daniel Vestergaard Olesen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  24. VIBRATION-BASED DAMAGE DETECTION: WITH FOCUS ON MITIGATING ENVIRONMENTAL AND OPERATIONAL VARIABILITIES THROUGH COINTEGRATION

    Juan Carlos Burgos Diaz

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2020

    Student thesis: Master Thesis and HD Thesis

  25. 2019

  26. Advanced Analysis of Steel Structures

    Anders Anthonipillai

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  27. CFD analysis of current drag on the Floating Power Plant platform P80

    Daniel Rothwell Pedersen, Martin Kirk Hoffmann

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  28. Deformation and Stress Prediction Methods in Tunnels and their Comparison

    Frederik Mitev

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  29. Derivation and application of cone factors in Danish soils: Cone factors in Søvind Marl

    Jakob Lund Nadj

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  30. Dynamic Modelling of Monopiles for Offshore Wind Turbines

    Kenneth Christiansen, Thomas Skov-Pedersen, Casper Østergaard Nielsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  31. Elasto-Plastic Constitutive Modelling of Geotechnical Material - Investigation of the Intermediate Principle Stress Influence and Exploration of the General Parametric Yield Surface Format

    Johan Nielsen, Kenneth Sixhøj Jepsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  32. Finite element modelling of reinforced concrete elements

    Martin Wickstrøm, Christian Bryde Laursen, Bianka Ruska

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2019

    Student thesis: Master Thesis and HD Thesis

  33. 2018

  34. Analysis of aerodynamic stability of long-span suspended bridges

    Carlos Carepa Cordeiro

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  35. Behaviour of Axially Loaded Bucket Foundations in Sand

    Sorin Grecu

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  36. Change of surface design of monopile (Revised)

    Mads Bak-Jensen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  37. Comparative analysis on the methods for determination of consolidation and creep parameters using custom software

    Juan Antonio Rebollo Parada

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  38. Implementation and comparison of two numerical models for trawl cod-ends

    Mihhail Samusev

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  39. Implementation of Interface Friction Finite Elements

    Stanislav Krejci, Eira Lillestøl

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  40. Implementation of parallelization in Finite Element Analysis

    Daniel Dalgaard Cramer

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  41. Implementation of Paul-Mohr-Coulomb in the finite element method

    Boris Sørensen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  42. Numerical Analysis of new Plate Load Tests on LWA

    Brian Bjerrum

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  43. Numerical assessment on pile stability in liquefiable soil

    Aske Theis Mikkelsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  44. Probabilistic Assessment of Existing Structures: Reliability Updating Through Testing

    Meick Jirathanaphan Jørgensen, Simon Bak

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  45. Transportation and Installation of the TetraSpar Floating Offshore Wind Turbine

    Cristino Manuel Gonzalez Leon, Nils Gilbert Karl Martin, Eduardo Benitez Villaespesa

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2018

    Student thesis: Master Thesis and HD Thesis

  46. 2017

  47. Advanced finite element modelling of reinforced concrete

    Nicolas Toro Martinez

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  48. Coastal erosion and climate description of Nørlev Strand area

    Ofelia Yocasta Rivero

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  49. Coastal erosion in Faxe Ladeplads: Alternative approach

    Federico Fascio

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  50. Damping of Edgewise Vibration of Wind Turbine Blades by Smart Liquid Dampers

    Rene Bundgaard Andreasen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  51. DEFORMATION AND BEARING CAPACITY OF BUCKET FOUNDATIONS IN SILT AND SAND

    Vinojan Vethanayagam

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  52. Determination of p-y Curves using Finite Element Modelling for Bucket Foundation in Undrained Clay

    Mogens Bonde Hvidberg

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  53. Development of driveability model for piles for offshore wind turbines

    Mads Helsager Harpøth

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  54. Dynamic analysis of periodic structurs

    Samsor Sohil

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  55. Numerical Analyses of the Behaviour of a Sheet Pile Wall

    Erik Gammeljord, Mathias Sundahl Grønholdt

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  56. Numerical modelling of foundations for offshore wind turbines

    Tamas Csaba Bogdan

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  57. Prediction of wave propagation in soils using semi-analytic method

    Erik Vano, Forid Gobuzi, Lander Iglesias Bengoa

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  58. Reliability-based classification of the load bearing capacity of existing bridges

    Francisco Manuel Lorente Morales

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  59. Renewal of water in monopiles for offshore wind

    Lasse Drejer Andersen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  60. Sedimentation around Thyborøn Channel: Effects of Improving Storm Surge Levels in The Limfjord

    Theis Buys Petersen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2017

    Student thesis: Master Thesis and HD Thesis

  61. 2016

  62. Assessment of Fatigue and Extreme Loading of Wind Turbines

    Halldór Páll Jóhannsson, Anthon de Luna Søndergaard

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  63. Avancerede analyser af stålelementer: Sammenligning af metode 6.3.3 og 6.3.4

    Kasper Grønborg Larsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  64. Buckling of Steel Shell Structures

    Kasper Knudsen, Mads Thorup

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  65. Dynamic analysis of Soil-Foundation Interaction

    Joeri Nithan Prins

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  66. Effects of 2nd order wave on Mooring Line Forces of a Floating Space Frame Structure

    Shravan Kantharaja

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  67. Elasto-plastic concrete beam analysis by 1-dimensional Finite Element Method

    Niels Færch Overgaard, Martin Bundgaard Andreasen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  68. Finite Element Modelling: Analysis of Reinforced Concrete Elements

    Laurentiu-Fabian Bitiusca

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  69. Ground Vibrations: Effects of masses placed on or in the ground

    Ioan-Oreste Paven, Mihai Muresan, Liviu-Ionut Muresan

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  70. Hydrodynamic forces on monopiles with secondary structures. Numerical approach

    Michael Nygaard

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  71. Implementation of a two-surface plasticity model for cyclic loading on sand into the finite element method

    Jonas Vestergaard Nielsen, Guillaume Maxime Melin

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  72. Installation of Suction Bucket Foundations in Sand

    Thomas Gitsas, Georgios-Nektarios Sgourakis, Hector Pandiella Martinez

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  73. cover.PNG

    Nonlinear analysis of earthquake-induced vibrations

    Vlad Inculet

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  74. Nonlinear analysis of reinforcement on concrete elements

    Lucian-Aurelian Ionita

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  75. Non-linear Static and Dynamic Finite Element Analyses of Reinforced Concrete Structures

    Michele de Filippo

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  76. Numerical Lower Bound Limit Analysis of Static Loaded Plates by Nonlinear Programming

    Rasmus Urhøj Hansen, Ermin Sehovic, Bo Rasmussen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  77. Numerical Lower Bound Limit Analysis of Static Loaded Plates by Nonlinear Programming

    Rasmus Urhøj Hansen, Ermin Sehovic, Bo Rasmussen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  78. Numerical Lower Bound Limit Analysis of Static Loaded Plates by Nonlinear Programming

    Rasmus Urhøj Hansen, Ermin Sehovic, Bo Rasmussen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  79. Optimization of Tension Leg Buoy with regards to Stabilization Failure

    Frederik Falk Hornbak, Jesper Trolle

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  80. Optimized Design of Wind Turbine Jacket Foundations: Improved efficiency and accuracy in the sequential integrated approach

    Dawid Jakub Augustyn

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  81. The effect of interoperability between BIM and FEM tools on structural modeling and analysis.

    Haroon Khalyar, Tamás Drávai, Gabor Nagy

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  82. Warping Torsion in 3D Beam Finite Elements

    Lynge Udengaard Andersen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  83. Wave Action on Offshore Monopile Foundations: A study on run-up, slamming & influence of secondary structure

    Ana Bermejo Jimenez, Resmi Anna Abraham, Mari Kalmo

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2016

    Student thesis: Master Thesis and HD Thesis

  84. 2015

  85. Comparison between 2D and 3D considerations of a railway embankment

    Britta Seidenkrantz Søndergaard

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  86. Design collaboration between Finite Element Analysis and Architectural model

    Zuzana Mikurcikova

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  87. Dynamic analysis of a bridge structure exposed to high-speed railway traffic

    Paulius Bucinskas, Liuba Agapii, Jonas Sneideris

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  88. Fatigue Behavior and Reliability of Concrete

    René Meklenborg Miltersen Slot, Tias Andersen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  89. Finite Element modelling of reinforced concrete: Structural analysis of a reinforced concrete beam

    George Chiruta

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  90. Modelling of Random Variations in Soil Properties

    Weerapong Penriya, Marta Marton

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  91. Nonlinear Time-domain Analysis of Floating Space Frame Structures: Floating Offshore Structures

    Arber Kadriu, Alaa Mohammad Taha

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  92. Reliability Analysis of Fatigue in Composite Reinforcement Tension Bars in a Bridge Structure

    Frederik Boysen, Christian Hjorth

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  93. Warping Torsion in 3D Beam Finite Elements

    Dennis Nedergaard Olsen, Lynge Udengaard Andersen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2015

    Student thesis: Master Thesis and HD Thesis

  94. 2014

  95. Analys of Geometrical Imperfections in Structural Columns

    Martin Christensen, Peter Roug

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  96. Decision support for operation and maintenance of offshore wind turbines

    Andreea Almasi

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  97. Dynamic amplification of deformations in railways due to high-speed traffic on soft ground

    Søren Holm, Andreas Elkjær Riis

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  98. Fatigue in cast metals: A generalized algorithm for multiaxial loading

    Erik Bouvin Pedersen, Morten Eggert Nielsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  99. Finite element implementation of the asymptotic postbuckling model

    Daniele Della Rosa

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  100. FUTURE INFORMATION TECHNOLOGY AT THE CONTRUCTION SITE: BIM INSIDE THE CONTRACTORS ORGANIZATION: INFORMATION SHARING AND TRANSFERRING ALONG THE CONSTRUCTION STAGE. APPLICATION OF BIM IN INFRASTRUCTURE PROJECTS

    Carlos Jorge Picareta da Graca

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  101. Methods for prediction of wave kinematics

    Pau Mercade Ruiz

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  102. Modeling of nonlinear structural response from explosion loads on offshore structures

    Bjarke Bendiksen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  103. Nonlinear Numerical Analysis of a Dynamically Loaded Wind Turbine Tower

    Rasmus Bøgelund Madsen, Christian Munk Svendsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  104. Response of a stiff monopile in cohesionless soil to the offshore loading conditions

    Aleksandra Katarzyna Lada

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  105. Response of Rubble Mound Breakwaters Exposed to Long Waves

    Mads Sønderstrup Røge, Nicole Færch Christensen, Jonas Bjerg Thomsen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  106. stepa1.jpg

    Semi-submersible topside conceptual design: Transition piece

    Fernando Vidal Puche

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  107. Silts egenskaber og styrkeparametre undersøgt ved konsoliderede drænede triaxialforsøg og CPT

    Maria Krogh Mortensen

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  108. Simulation of geometrical imperfections and reliability estimation of cylindrical shell structures

    Martin Winther Boserup, Christian Lebech Krog

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

  109. Vertical Loading on Suction Caisson Foundation

    Elia Manzotti

    Structural and Civil Engineering, Master, (Master Programme) 4. term, 2014

    Student thesis: Master Thesis and HD Thesis

Previous 1 2 Next